LangryRH75-ALangry RH75-A Concrete Test Hammer
The light rebound hammer, 0.735 joules, for thin sections, precast units and anywhere the full 2.207 joule impact would be too much.
Request Quote
Concrete, Testing & Plant
Langry Products
The Langry non-destructive range: rebound hammers, rebar scanners, pile integrity, crack and pull-out testing.
24 products
LangryRH75-A
LangryRH225-BLangry RH225-B Digital Concrete Test Hammer
The digital hammer. Electromagnetic sensor, a gyroscope that knows which way you are pointing it, and a thousand test areas in memory.
Request Quote
LangryRH450-ALangry RH450-A Concrete Test Hammer
4.5 joule impact energy, developed for the high strength concrete a standard 2.207 joule hammer cannot read.
Request Quote
LangryRH550-ALangry RH550-A Concrete Test Hammer
5.5 joules, the heaviest hammer in the range, for the highest strength grades on structural work.
Request Quote
LangryRH20-ALangry RH20-A Mortar Rebound Hammer
A mortar hammer, not a concrete one. Two to fifteen megapascals, with a direct reading scale for masonry joints.
Request Quote
LangryGZI / GZII / GZIII / GZIVLangry GZ Series Rebound Hammer Testing Anvil
The anvil every rebound hammer is calibrated against. Four weights, one for each hammer in the range.
Request Quote
LangryRS250Langry RS250 Rebar Scanner
Portable rebar scanner reading to 210 mm of cover, with twenty four hours of battery and PC analysis software behind it.
Request Quote
LangryRS150Langry RS150 Rebar Scanner
Probe in the hand or probe on a trolley, one instrument either way. Stirrup correction keeps the reading honest on congested steel.
Request Quote
LangryTD6Langry TD6 Rebar Detector Testing Device
The calibration block a rebar scanner is verified against, in non magnetic material so it does not fight the instrument.
Request Quote
LangryP16 / P25Langry P16 & P25 Pull-off Tester
Bond strength on mortar, asphalt, tiles, coatings and protective layers, to sixteen or twenty five kilonewtons.
Request Quote
LangryP50Langry P50 Pull-off Tester
Fifty kilonewtons, with the force time curve and the load on the same screen so the whole test is recorded, not just the peak.
Request Quote
LangryP10Langry P10 Pull-off Tester
Ten kilonewtons with a 65 mm journey, for insulation fixings, wall thermal systems, plates and paint.
Request Quote
LangryP6Langry P6 Pull-off Tester
Two kilograms, display and host in one body, ready to use the moment it is switched on.
Request Quote
LangryPA10Langry PA10 Automated Pull-off Tester
One click loading, automatic stop at fracture and automatic recording of the peak. The bench version of the pull off test.
Request Quote
LangryAPT100 / 200 / 300 / 500 / 1000Langry APT100 to APT1000 Anchor Pull-out Tester
One hundred to one thousand kilonewtons of drawing force, for anchors, rebar, expansion bolts and curtain wall tensile testing.
Request Quote
LangryAT10-MLangry AT10-M Adhesion Tester
Handheld adhesion testing to ASTM D4541 and D7234, with no external power supply and an IP65 housing.
Request Quote
LangrySJY-800B / SJY-1000BLangry SJY-800B & SJY-1000B Penetration Strength Tester
Nail penetration depth converted to compressive strength. The quick non destructive check on mortar and concrete.
Request Quote
LangryRH225-ALangry RH225-A Concrete Rebound Hammer
The standard first check on hardened concrete: compressive strength from 10 to 70 N/mm², read off the scale in seconds.
Request Quote
LangryRS350Langry RS350 Integrated Rebar Scanner
Locates rebar position, direction and diameter and measures cover depth, before anyone drills into a slab they should not have.
Request Quote
LangryUPV2100Langry UPV2100 Ultrasonic Pulse Velocity Tester
Reads pulse velocity through a member to infer strength, density and internal cracking. A one handed integrated unit rather than a box of leads.
Request Quote
LangryPIT8300Langry PIT8300 Low Strain Pile Integrity Tester
Low strain reflection testing for bored piles: finds necking, voids and breaks, and tells you how far down they are.
Request Quote
LangryFT90Langry FT90 Floorslab Thickness Tester
Two probes, one slab, no coring. The receiving probe finds and locks the centre itself, so a thickness check stops being a two person argument.
Request Quote
LangryCWD800Langry CWD800 Crack Width & Depth Tester
Measures how wide a crack is and how deep it goes, with an HD camera that captures the width automatically for the report.
Request Quote
LangryAPT50Langry APT50 Anchor Pull-out Tester
Proof loads anchors, rebar and expansion bolts to 50 kN, and holds the force time curve on screen for the record.
Request Quote
Read before you buy
Buyer guides and price checks
- Rebound HammersRebound Hammer Test: Price, Procedure and Which Schmidt Hammer to Buy in PakistanWhat a rebound hammer test measures and where it fails, the ASTM C805 procedure in short, analogue versus digital Langry models with 2026 Pakistan prices, and calibration on the anvil.Read the guide
- Rebar ScannersRebar Scanner and Cover Meter Price in PakistanRebar scanner and cover meter prices in Pakistan for 2026, Langry RS150, RS250 and RS350 against the Profometer class, how they work, and the cover checks to run.Read the guide
FAQ
Langry Products in Pakistan: what buyers ask
What is the price of langry products in Pakistan?
Prices for langry products in Pakistan move with the exchange rate, so we quote by WhatsApp on the day rather than publish a figure that is wrong by the weekend. Send the model or the job and Shahzad Brothers replies with a current price, availability in Rawalpindi and delivery time to your city, usually within the hour during business hours.
Which langry products does Shahzad Brothers supply?
The current range includes Langry RH75-A Concrete Test Hammer, Langry RH225-B Digital Concrete Test Hammer, Langry RH450-A Concrete Test Hammer and 21 more. Everything is listed on this page with its model and specification, and we source models that are not listed on request.
Do you deliver langry products outside Rawalpindi and Islamabad?
Yes. Shahzad Brothers delivers nationwide from Rawalpindi, typically in 2 to 3 working days to Lahore, Peshawar, Karachi, Multan, Faisalabad and most other cities. Larger machinery goes by dedicated transport and we quote the freight with the price.
Is there a warranty and service for langry products in Pakistan?
New equipment carries a 2 year warranty honoured in Rawalpindi, not overseas. Service, calibration and spares are handled on our own bench, which is why most of our customers are repeat buyers: contractors, consultants, universities and government departments supplied since 2002.
More in Concrete, Testing & Plant
Get in touch
Tell us what your project needs
Send us the details and we will come back with equipment recommendations, availability and pricing. No obligation.